< Home > < Product & Service Offering > < Introduction > < Table of Contents > < Tool Specification Charts >      Chart I Coil Tubing Overshot, Cutting Coil Tubing Overshot, Pack-Off Sub  Chart II Mechanical Spear, Hydraulic Spear,Venturi Jet Junk Basket  Chart III JAF Hydraulic Disconnect, FDL Hydraulic Disconnect, Dual Circulation Sub  Chart IV Coil Tubing Connector, Dual Flapper Valve, Shear Pull Disconnect  Chart V Locking Swivel Joint,Torque-Thru Knuckle Joint, Mechanical Bow Spring Centralizer, Hydraulic Bow Spring Centralizer

© Copyright 2000-2004, Core Laboratories All Rights Reserved Thru-Tubing Technology is a division of Owen Oil Tools 402 Machine Loop Scott, LA 70583 Phone: 337-984-1181 Fax: 337-984-3044 www.corelab.com/owentools * Unless otherwise indicated, all the strength figures shown are the result of calculations based on the yield strength of the material used in the manufacture of these products. These strength calculations are considered accurate within plus or minus 20% and are to be used only as a guide. They do not constitute a guarantee, actual or implied. In use an appropriate allowance should be made as a safety factor.