< Home > < Product & Service Offering > < Introduction > < Table of Contents > < Tool Specification Charts >  Continous Tubing Overshot TT0180 - # # # #  Flat Coil Tubing Overshot TT0180 - # # # D  Cutting Overshot TT0180 - # # # K  Pack-off Sub TT0181 - # # # #  Coiled Tubing Overshot Extension TT0184 - # # # #  Drive Bushing TT0185 - # # # #  Domed Mouse Trap Overshot TT0190 - # # # #  Mechanical ‘GS’ Spear TT0200 - # # # #  Mechanical ‘GS’ Spear with ‘XX’ Prong TT0200 - # # # C  Hydraulic ‘B & W’ Spear TT0210 - # # # E (Patent Number 5947202)  Hydraulic ‘GS’ Spear TT0210 - # # # E (Patent Number 5947202)  Bull Dog Spear TT0212 - # # # A  Rope Spear TT0290 - # # # #  Boot Collar Basket TT0300 - # # # #  Venturi Jet Junk Basket TT0320 - # # # #  ‘GS’ Venturi Collet Head TT0325 - # # # #  High Powered Magnet TT0381 - # # # A  Rotational Inertia Impact Tool TT0465 - # # # #  Rotary Shoe TT0500 - # # # #  JAF Hydraulic Disconnect TT0700 - # # # # (Patent Number 5526888)  FDL Hydraulic Disconnect TT0701 - # # # # (Patent Number 5526888)  FE Hydraulic Disconnect TT0702 - # # # #  Circulation Sub TT0710 - # # # #  Dual Circulation Sub TT0710 - # # # B  Drain Sub TT0710 - # # # #  Dynamic Closing Circulation Sub TT0712 - # # # #  Coil Tubing Connector TT0740 - # # # #  Torque-Thru Roll-On Coil Tubing Connector TT0744 - # # # #  Dual Flapper Valve TT0750 - # # # #  Motorized Bait Receptacle TT0760 - # # # #  Dual Bait Receptacle TT0760 - # # # B  Lead Impression Block TT0791 - # # # #  Pull Plate for Coil Tubing Connector TT0800 - # # # #  Swivel Joint TT0810 - # # # A  Locking Swivel Joint TT0810 - # # # B  Torque-Thru Knuckle Joint TT0900 - # # # #  SealedKnuckle Joint TT0901 - # # # #  Fixed Bladed Stabilizer TT0910 - # # # #  Mechanical Bow Spring Centralizer TT0911 - # # # #  Hydraulic Bow Spring Centralizer TT0912 - # # # #  Rotating Sleeve Stabilizer TT0913 - # # # #  Nipple Locator TT0920 - # # # #  Mechanical Nipple Locator TT0922 - # # # #  G-Stop Hydraulic Setting Tool TT1200 - # # # #

© Copyright 2000-2004, Core Laboratories All Rights Reserved Thru-Tubing Technology is a division of Owen Oil Tools 402 Machine Loop Scott, LA 70583 Phone: 337-984-1181 Fax: 337-984-3044 www.corelab.com/owentools * Unless otherwise indicated, all the strength figures shown are the result of calculations based on the yield strength of the material used in the manufacture of these products. These strength calculations are considered accurate within plus or minus 20% and are to be used only as a guide. They do not constitute a guarantee, actual or implied. In use an appropriate allowance should be made as a safety factor.