These dome loaded back pressure regulators are designed to maintain pressures from as low as 100 psi to as high as 10,000 psi. The set point pressure is applied to the diaphragm using high pressure gas. Typical flow rates are 1 to 600 cc/hour. These regulators are designed with low dead volume. BP series regulators are normally used in single phase flow applications. BPR Series regulators are normally used in two or three phase flow applications. These regulators are available in 316 Stainless Steel, Hastelloy C, and Monel wetted material.

Click here for the technical documentation on this product.

Product Images