Software Downloads

To better serve our customers we will email or mail software updates to them directly. Please contact us with requests for software and include your company name, location, product serial number and contact information.

LABCON Software Version 5.00
This version was released in January 2011. It is written to accept the use of both newer PCI data acquisition boards or the older ISA data acquisition boards. It also improves the control of both new and old data acquisition boards.

LABCON Software Version 4.17
This version was released in January 2010. It provides standard atmosphere barometric compensation at powerup.

LabCON-V Software Version 4.16
This version was released in September 2008. It corrects the bracketing validation method for samples requiring a repeat run per ASTM D 2699 and 2700.

LabCON-V Software Version 4.15
This version was released in August 2007. It changes the CR calibration points to allow for a running condition during calibration. Iso-octane used: 90 MON / 100 RON.

LabCON-V Software Version 4.14
This version was released in April 2007. It provides the ability to specify the RON / MON TSF lean steps.

LabCON-V Software Version 4.13
This version was released in August 2006. It corrects the PRF bracketing fuel tolerance for sample octanes over 100.

LabCON-V Software Version 4.12
This version was released in May 2006. It allows for entry of tuned temperatures in the range of 60-139 +/- 40 degrees F.

LabCON-V Software Version 4.11
This version was released in May 2006. It corrects history file storage for CR ratings with the repeat reading option enabled. It also corrects the I/O Control touch operation when holding down the CR raise or lower buttons.

LabCON-V Software Version 4.10
This version was released in January 2005. The barometric CR compensation algorithm was revised to match the ASTM 2699 and 2700 barometric compensation tables exactly. It also corrects the manual barometer input to allow values below 22. The advanced settings will now be saved when the dialogue window is closed.

LabCON-V Software Version 4.09
This version was released in May 2004. It provides changes in the mouse routine to allow for the new touchscreen controller in Advantech units s/n 516 and higher.

LabCON-V Software Version 4.08
This version was released in March 2004 and changes the Proto Calibration routine to comply with ASTM D 2885-03. This revision counts proto-line as one complete cycle so the TotalCycles parameter should be modified to include 10 delta octane data points.

LabCON-V Software Version 4.07
This version was released in February 2004. It removes reference to the obsolete calibration slug in the calibration routine. It also changes the temperature tuning limit algorithm to match the revised ASTM 2699 and 2700 standards.

LabCON-V Software Version 4.06

This version was released in July 2003. The revision fixes a problem with the date where a LabCON unit left on over a two day or greater period, with no activity, will lose track of the day. The new software correctly increments the date when two consecutive "midnight" occur. This problem is specific to the Advantech style computer (S/N 500+).

LabCON-V Software Version 4.05
This version was released in March 2003 and adds an option to enter PRF and sample microvalve averages manually from the Initialize Microvalve screen. This allows form annual entry of microvalve averages before and after testing of fuels with unusual microvalve positions (premium gasoline, gasoline components etc.)

LabCON-V Software Version 4.04
This version was released in December 2002 and includes a manual screen saver as well as clarification to engine temperature warnings. The CR method's tolerance for KI values not requiring manual set point adjustment has been opened to 30-70 KI.

Software Distribution
You can obtain the latest version of LabCON-V software on disk by contacting Refinery Systems at 609-452-8600. A packet will be sent with disk and installation instructions .The software update disk will update versions 4.03 and higher to the latest version.

Revision History
Please contact us and let us know what s/n units are being upgraded so we can update our database.